Hotline: 0945 006 001
THẢO LINH

Call us:

0945 006 001

5.4 mm Natural Diamonds

5.4 mm natural diamonds (about 0.63 carat), GIA certified. Above half a carat, a stepping stone before the one-carat mark.

Carat

The weight of the diamond. 1 carat = 0.2 grams. Higher carat, higher value.

Color

Graded from D (most colorless) to Z. Lab-grown diamonds are usually a beautiful D–H.

Clarity

How free the stone is of inclusions. FL/IF are the cleanest; VVS1–VVS2 are the most popular.

Cut

Cut decides how much a diamond sparkles. Excellent is the top grade, returning the most light.

About 5.4 mm Natural Diamonds

5.4 mm natural diamond, GIA certified, F colour, VVS1 clarity. The step from 5.2 mm to 5.4 mm is only two tenths of a millimetre, but the price nearly doubles, and this page explains why.

5.4 millimetres is the diameter of the stone's face, about 0.63 carat for a well-cut round stone.

Natural diamond prices rise progressively, not proportionally. The reason is simple: the larger the rough, the rarer it becomes, exponentially, because a mine yields many small stones and very few large ones. A 0.63 carat stone isn't more expensive than a 0.55 carat stone in proportion to weight; it's more expensive in proportion to rarity.

This is the biggest difference between natural and lab-grown diamonds. Lab-grown stones aren't limited by the rarity of the rough, so their price rises almost proportionally, and at the same size and colour they cost 60 to 70 percent less than natural stones. Buyers of natural stones at this size are paying for rarity and for the buy-back market, not just for the stone.

If you're weighing the two, the clearest way to decide is: buying to mark an important occasion and caring about retained value, choose natural; prioritising the largest size possible within your budget, choose lab-grown. We sell both and don't say one is better than the other.

About this stone: F colour is the last grade of the colourless group; on its own nobody can see a yellow tint. VVS1 clarity is the second-highest grade, with inclusions only findable under ten-times magnification. At 5.4 mm, both specifications are above what the naked eye can read, so this is a stone with nothing to weigh up on quality.

Visually: 5.4 mm is the size where a stone starts to draw attention. On fingers in sizes 11 to 14, the stone covers a clear share of the finger's width, and the person facing you sees it without looking closely. This size is often chosen for engagement rings when you want a clearly visible stone without entering one-carat price territory.

With a halo setting, the ring face grows to about 8 mm across, looking like an 8 mm center stone on its own. This is the most common way to make a large ring face within budget, and it also protects the stone's edge better than a bare prong setting.

On setting: at this size a six-prong setting holds more securely than four prongs while still showing enough of the stone. The craftsman shapes the inside of each prong to match the angle of the stone's edge before setting it, because forcing prongs onto a mismatched seat is the fastest way to crack the edge. After setting, each prong is checked under a loupe before polishing.

On finger size: on fingers below size 10 this stone will look very large, so the band must be slim to keep the ring from looking top-heavy. On fingers from size 14 up this size is moderate, and side stones on the band can add balance.

On care: wash in warm water with a few drops of dish soap, brush the underside of the stone with a soft brush, rinse well and dry. Take your ring off when using cleaning products and for manual work. Check the prongs every few months; the heavier the stone, the faster the prongs wear.

The stone has its own GIA report number, which you can verify on the institute's website before deciding.

Thảo Linh's consultants are here to help

Contact us now and we'll help you choose the perfect natural diamond.

Shopping cart

Your cart is empty

Add a piece to continue shopping

Explore jewelry