Hotline: 0945 006 001
THẢO LINH

Call us:

0945 006 001

4.2 mm Natural Diamonds

4.2 mm natural diamonds (about 0.27 to 0.30 carat), GIA certified. A moderate size for delicate solitaire rings and everyday earrings.

Carat

The weight of the diamond. 1 carat = 0.2 grams. Higher carat, higher value.

Color

Graded from D (most colorless) to Z. Lab-grown diamonds are usually a beautiful D–H.

Clarity

How free the stone is of inclusions. FL/IF are the cleanest; VVS1–VVS2 are the most popular.

Cut

Cut decides how much a diamond sparkles. Excellent is the top grade, returning the most light.

About 4.2 mm Natural Diamonds

4.2 mm natural diamonds, GIA certified, F colour, VVS1 clarity. This size sits between 4 mm and 4.5 mm, and that in-between position is the point worth making.

4.2 millimetres is the diameter of the stone's face, about 0.27 to 0.30 carat for a well-cut round stone.

Natural diamonds aren't cut to whole sizes. Cutters follow the shape of the rough to keep as much weight as possible, so whatever diameter results becomes the size. That's why stock always includes in-between sizes like 4.2 mm, 5.2 mm and 6.3 mm, and that's normal stock, not leftovers.

The advantage of in-between sizes lies in how the market prices them. Diamond prices jump at round weight marks, and 0.30 carat is one of them. A stone just over that mark carries the new price step, while in diameter it's only a few hundredths of a millimetre larger than one below the mark — a difference the eye can't catch.

The two stones on this page sit right in that zone. Visually they're equal to a 0.30 carat stone; in price they don't carry the full premium of the mark.

About F colour: it's the last grade of the colourless group. On its own, nobody can see any tint in an F stone. Only next to a D stone does the D look one grade whiter, and at a small size like 4.2 mm even that comparison is hard to call.

There's a practical detail: if you set the stone in yellow or rose gold, the metal's reflection into the stone erases almost all colour difference, so F colour is the economical choice. If you set it in white gold, the white metal makes a lower-colour stone easier to compare, so lean toward D or E.

VVS1 clarity at this size means inclusions so small a jeweler needs ten-times magnification to find them. It's a high grade, and it's what drives the price of these two stones.

On use: 4.2 mm fits most ready-made women's ring settings, so you don't have to wait for a custom setting. With a halo setting, the ring face grows to about 6 to 7 mm, looking like a 6 mm center stone on its own, at a much lower price.

The craftsman checks the setting before setting the stone to make sure the prongs fit its diameter exactly. A setting a few tenths of a millimetre too wide or too narrow affects long-term security, and this can't be seen once the ring is polished.

On care: wash in warm water with a few drops of dish soap, brush the underside of the stone with a soft brush, rinse well and dry. Take your ring off for housework with chemicals and for exercise; diamonds don't scratch, but gold prongs wear.

Each stone has its own GIA report number, verifiable on the institute's website.

Thảo Linh's consultants are here to help

Contact us now and we'll help you choose the perfect natural diamond.

Shopping cart

Your cart is empty

Add a piece to continue shopping

Explore jewelry