Square Flower-Form Natural Diamond Ring Setting
Product code: NN-11185
Material
Ring size (Vietnamese sizing)
Not sure of your size? Order anyway — we will help you measure when we contact you to confirm. Free lifetime resizing.
Quantity
A women's 18K white gold ring setting, sold without the main diamond. The face is a square flower-form block built entirely from round diamonds in two layers, its edge projecting past the band, with an empty four-prong head in the middle. Both sides of the band have three rows of stones, the middle row rectangular stones in a channel.
Jewelry details
Looking straight down, the face isn't a circle but a four-sided square block — built entirely from round diamonds, the stones radiating from the center like the petals of a flower. The very center of that block is still left empty, awaiting the diamond the buyer chooses.
This is a ring setting — a finished gold frame, the price doesn't include the main diamond. All the stones already set on the setting are included in the price.
Not a single stone here is cut square. The square comes from how they're arranged.
Why the square block is made from round stones
The easiest way to get a square face is to use square-cut stones. This one does the opposite: everything is round diamonds, and the square comes from the arrangement — the stones at the front and back are larger than those on the two sides, set in two overlapping layers, so the outer outline swells at the four corners into a square with slightly curved sides.
Doing it this way is much harder, but it gives two things square stones can't:
With square-cut stones
A crisper shape, but square stones return light in flat panels and have four sharp corners — the corners are the thinnest spots, and chip easily when knocked against a table edge.
This design — round stones
Round stones catch light evenly in every direction, with no dead angles and no corners prone to chipping. The whole block sparkles continuously as the hand moves.
The price is in the craftsmanship: the stones must be chosen at the right size for each position, since one spot off-size distorts the square outline, and the eye notices at once without knowing why.
The empty center
In the middle of the block are four round prongs standing upright, rising well above the stones, tips still cut flat. Beneath them is a short open collet, which is where the diamond will sit.
These four prongs aren't their final shape yet. When the customer brings in a stone, the jeweler places it in the head, bends the four prong tips down over the girdle, trims the excess and re-polishes. That step can only be done once and can't be undone.
That's why you should bring your stone to test in the setting before deciding. A stone too small sinks in, and the prongs have to stretch to grip it, looking crude; one too large won't seat in the head and has to be ground wider, cutting into the supporting frame beneath.
The edge of the face projects past the band
From the side you'll see the block of stones is wider than the band and projects out on both sides like a small tray. That's intentional: it makes the face look much larger than the amount of gold actually used, and creates a line of shadow beneath the edge so the block seems to float above the finger.
But two real consequences are worth knowing in advance:
Both sides of the band
Running down from the face, the band flares to its widest and then narrows toward the base. On that surface are three parallel rows of stones.
The middle row is rectangular stones, straight-edged, set between two plain gold walls running all along — with no prong beads between the stones. The two flanking rows are round stones graduating smaller away from the face, held by tiny gold beads, with the edges of the band lightly notched around each stone.
These two setting styles give two different qualities of light side by side: the middle row returns light in wide, slow panels, while the two edge rows flash as a string of separate points. Placed together, they give the band depth rather than a flat look.
The base of the band is plain, polished gold. This is the section inside the palm — where it takes the most wear, and the only section the jeweler can cut and join when resizing is needed.
18K white gold and natural diamonds
The setting is made of 18K white gold. For a ring whose surface is almost entirely stone seats, the gold decides how long it lasts: every small bead and every channel wall must bear daily knocks without deforming.
All the stones already set are natural diamonds, chosen in the same white. On a closely packed block like this, color uniformity matters far more than the quality of each individual stone — just one off-tone spot and the whole block shows it like a dull speck.
The honest trade-off: densely set stones sparkle, but there are also many crevices for dust and lotion to collect. A ring like this doesn't dull at once but fades gradually, and people who wear it daily usually don't notice — until after cleaning, when it looks completely different.
Everyday wear, sizing and care
A few things you can do at home, without visiting the store:
Soak in warm water with a little dish soap for about five minutes to soften grime, then brush with a very soft brush.
Brush upward from underneath, through the open frame beneath the block of stones. Dust collects at the base of the stones, not on top.
Take the ring off for washing dishes, applying hand cream, weightlifting and sleeping.
Every few months, hold the ring near your ear and shake it gently. A faint rattle means a stone has loosened — bring it to the store to tighten before it falls out. Check the projecting edge most closely.
When bringing it in for polishing, ask the jeweler to polish only the plain gold at the base. A polishing wheel can't tell base gold from the beads holding stones — a few hard passes and the beads wear down and the stones start to loosen. For the stone-set areas, ultrasonic cleaning is enough.
On sizing: a wide band always feels tighter than a narrow one of the same number, and the projecting face means the resizing range later is fairly limited. Try this exact ring, at the end of the day when your hand is slightly swollen — that's when it's tightest.
Who it suits
This is a ring for someone who wants a piece visible right from afar. It doesn't belong to the minimalist group and doesn't pretend to. It suits parties, ceremonies and gatherings; if you're looking for a ring to wear all day including manual work, choose a lower-faced design.
It especially suits someone who already has a diamond — handed down in the family, or taken from an old ring that no longer suits their taste. The surrounding block of stones makes the center stone look much larger than it would standing alone, so this is a way to renew an old piece without buying another large stone.
Buy at Thảo Linh
Showroom: 120 Pham Thi Tanh, Chanh Hung Ward, Ho Chi Minh City. You're welcome to bring your own stone to test directly in this setting before deciding, or choose a center stone right at the counter.
Hotline 0945 006 001. 12-month warranty, with free lifetime polishing and ultrasonic cleaning for customers who buy at the store.
The store buys back and exchanges openly at fixed rates, stated clearly at the time of purchase rather than recalculated arbitrarily later.
Lab-grown diamonds that fit this setting
Round shape · 21 in stock
