Open Ring with Pear and Emerald-Cut Lab-Grown Diamonds, 14K Yellow Gold
Product code: NN-17857
Material
Ring size (Vietnamese sizing)
Not sure of your size? Order anyway — we will help you measure when we contact you to confirm. Free lifetime resizing.
Quantity
An open 14K yellow gold ring with a pear-shaped lab-grown diamond at one end and two emerald cuts at the other, the branches between them set with small round stones.
Jewelry details
This is an open ring: the 14K gold band doesn't close but separates at the top. One end rises to hold a pear-shaped lab-grown diamond, while the other splits into two small branches, each ending in a rectangular emerald-cut stone. The three stones sit staggered across the finger, with rows of small round stones running along the branches.
The ring doesn't follow the familiar single center stone in the middle. It's more like a deliberately arranged composition: one soft shape and two geometric ones, offset yet balanced.
The pear at one end
The pear-shaped lab-grown diamond is held by four prongs: one at the point and three around the rounded end. The stone is tilted along the branch with its point aimed toward the center, so from above the teardrop seems to flow along the curve of the band.
A pear shape looks longer and slimmer than a round of the same weight, making the finger look slender. Its many facets sparkle strongly — it's the brightest point on the whole ring.
Two emerald cuts at the other end
The other end of the ring splits into two branches, each holding an emerald cut on four prongs. An emerald is a rectangular cut with flat stepped facets that reflect light in broad panels, a mirror-like shine rather than the fine sparkle of the pear.
Placing two emerald cuts beside the pear creates a clear contrast: one side soft and sparkling, the other square and crystal clear. That's also why the ring looks modern, suited to someone who likes mixing cuts in one piece.
Branches set with round stones
Along the branches leading to the three large stones run rows of small round lab-grown diamonds, set low against the gold and held by tiny beads. The stones run from the band right up to the base of each large stone, linking the three points of light into one whole.
At the back, the band is plain, rounded and mirror-polished. The slim back keeps the ring comfortable between the fingers, while all the attention is drawn to the top.
Honest points to consider first
An open ring is the style most prone to bending: the branches aren't closed, so knocks or pulling it open to put it on can spread or misalign the ends. Slide it straight onto your finger rather than prying the ends apart.
The point of the pear and the four corners of the emerald cuts are the most chip-prone spots. The prongs cover them fully, but you should still take the ring off for heavy work.
An open ring is very hard to resize because the gap between the ends must be preserved; get your size exactly right from the start.
How the workshop makes this ring
Three different cuts in one ring require careful stone selection: the pear and the two emerald cuts must share the same white tone, because emerald cuts reflect in flat panels and the slightest color difference shows next to the pear. The two emerald cuts must be the same size and set at the same height.
The emerald-cut prongs are placed exactly on the stones' four cut corners rather than on the straight edges, holding them securely without pressing on the corners. The prong at the tip of the pear is made thick; the setter cushions it and presses gradually, never forcing straight down on the point.
The band at the split is made thicker than usual to resist bending, then carefully polished, since yellow gold has no plating to hide scratches.
Metal and stones
The ring is made in 14K yellow gold — a naturally warm yellow that needs no plating, so the color stays stable over the years. 14K is harder than 18K, which an open ring really needs so the branches hold their shape and the prongs wear less.
The pear and the two emerald cuts are all lab-grown diamonds. Seventeen round lab-grown diamonds line the branches, matching the white tone of the three large stones. Lab-grown diamonds have the same structure, hardness and sparkle as mined diamonds — indistinguishable to the naked eye; the difference is in origin and price, so for the same budget you get three clearly shaped large stones instead of just one.
Sizing and keeping the ring bright
On sizing, there's one point people often get wrong: an open ring looks as if it can be squeezed to fit, but every squeeze or pull shifts the stones and loosens the prongs. Have your size measured at the store in the afternoon, when your fingers have naturally expanded, and try on a sample ring if you can.
Who it suits, and when to wear it
This ring suits someone who loves jewelry with personality, outside the traditional single-stone mold. Warm yellow gold brings out the three white stones, flattering tan or olive skin and pairing beautifully with earth tones, cream or black.
It looks lovely on the ring or middle finger, as a birthday or anniversary gift, or as an engagement ring for someone who loves to be different.
See the ring at Thảo Linh Jewelry
Visit the Thảo Linh Jewelry showroom to try it on, see the three stones in real light and have your size measured in person. The ring is crafted in Thảo Linh's own workshop and made to your size; the making time will be confirmed when you finalize the order.
