19-Stone 2.7 mm Lab-Grown Diamond Half Eternity Ring, 14K White Gold
Product code: NN-17832
Material
Ring size (Vietnamese sizing)
Not sure of your size? Order anyway — we will help you measure when we contact you to confirm. Free lifetime resizing.
Quantity
A 14K white gold half eternity ring: a row of 19 round 2.7 mm lab-grown diamonds across the top half, held by square prong blocks shared between neighboring stones; open galleries below and a smooth polished lower half.
Jewelry details
A 14K white gold half eternity ring with a row of 19 round 2.7 mm lab-grown diamonds running across the top half of the ring. The stones nearly touch each other, held by small square prong blocks shared between neighboring stones. The lower half is smooth and polished.
The notable thing is the proportion: the stones are wider than the metal band, so from above you see almost nothing but one continuous row of stones, with the metal receding behind.
The design: one continuous row, shared square prongs
Nineteen round stones of the same size are evenly spaced, set so close that the row reads as one continuous band of light rather than separate points. The row stops neatly right at both sides of the ring, not continuing below.
In each gap between two stones there are two square prong blocks with flat-cut tops — one at the top edge, one at the bottom — each pressing on the corners of both stones at once. Shared this way, each stone still has four holding points, but far less metal shows than if each stone had its own set of prongs. This isn't a channel setting with walls running along it, nor round bead prongs.
Under each stone is an open round gallery; from the side you can see the bottom of the stone — light enters from below, so the stones shine more than on a closed metal base. At the workshop, the hard part is drilling 19 perfectly even seats on a narrow band and then raising the square prong blocks in a straight line; because the prongs are square blocks, one off or twisted makes the whole row look uneven at once.
Three things to check when you hold it
The trade-offs, plainly. First, the stones' girdles extend beyond the metal band, so the edge of the stone is the first thing to touch hard objects — a hard knock on a table edge or door handle chips a girdle more easily than on a ring with a metal wall around the stones. Second, shared prongs mean that if one prong block wears or bends, two stones loosen together, so it needs regular checks rather than waiting until something wobbles. Third, the open galleries help the stones shine but are also where hand lotion and dust collect; without careful brushing the stones look cloudy. Fourth, the stones only run across the top half and the band is narrow, so over time the ring may rotate and the row of stones drift to the side of the finger.
Metal: 14K white gold and lab-grown diamonds
14K white gold is harder than 18K thanks to its higher alloy ratio — with shared prongs, each metal block carries two stones, so hardness decides how long the ring holds its stones. White metal also helps the row of stones read as one band. Over time the color may warm slightly; a re-polish restores it.
All 19 stones are lab-grown diamonds: the same carbon composition, hardness and brilliance as mined diamonds, differing in origin. With a row of same-sized stones like this, what matters is that the stones match in color and clarity; lab-grown diamonds make a fully matched set much easier to assemble at a noticeably softer price.
Who it suits, sizing tips and keeping it bright
This design suits someone who wants a ring with clear sparkle without needing a large stone in the middle: bright enough on its own, and great stacked beside an engagement or wedding ring because the narrow band doesn't overwhelm. A half row of same-sized stones is easy to style and suits any age.
On sizing: the band is narrow and light, so you can choose your exact size. If you plan to stack it with another ring on the same finger, try both together. The lower half is plain, so it can be enlarged or reduced later within a moderate range — but big changes will disturb the spacing of the row, so it's best to choose correctly from the start.
On keeping it bright: each week, soak the ring in warm water with a little dish soap for about ten minutes, use a soft brush on both the top and underside of the row, because the open galleries let dust in underneath, then dry with a soft cloth. Take the ring off for the gym, lifting or housework with chemicals. Store it separately in a compartment box. About every six months, bring it to the workshop to check the shared prong blocks.
Women's ring advice at Thảo Linh Jewelry
You can try it on in person at the Thảo Linh Jewelry showroom, 120 Pham Thi Tanh, Chanh Hung Ward, Ho Chi Minh City, or call 0945 006 001 for advice on sizing and stacking.
