Hotline: 0945 006 001
THẢO LINH

Call us:

0945 006 001

Lab-Grown Diamond Lever-Back Earrings, 14K

Product code: BT-10875

21.500.000đ

Material

Quantity

1
International certification
12-month warranty
Free delivery in Vietnam
Quality guaranteed

14K white gold earrings with a lab-grown center diamond in the middle of a cluster, and a band of stones tapering smaller as it runs along the curve of the earlobe. No hanging part — the face sits close to the ear, held by a lever-back that clamps both sides of the earlobe.

Jewelry details

Jewelry typeWomen's Earrings
Product codeBT-10875
MaterialVàng 14K
Gold colorTrắng
StoneLab-grown diamond
Trọng Lượng Tham Khảo~3.4g
Size Viên Chủ2 viên KC nuôi cấy tròn 4ly5 · 0.35ct/viên
Side stones16 stones
Side stone size2.4 mm
Center stone4ly5

A single-stone stud is a point of light in the middle of the earlobe, and that's all. This pair also sits close to the ear, but instead of a point, it's a cluster of stones that stretches out and follows the curve of the ear.

No dangling, no swinging. It hugs the earlobe and follows the shape of your ear.

A tapering band of stones — a face that follows the curve of the ear

The cluster isn't symmetrical. One end is the center stone with a ring of stones around it, and from there the stones get progressively smaller, forming a curved band running toward the rim of the ear.

An earlobe isn't a flat surface — it's a small curved one. A flat round face placed on it only touches in the middle and lifts at the sides. A curved tapering band can lie close along its whole length, so the earring sits flat on the ear rather than sticking out.

The visual effect is different too: instead of a stationary point of light, you have a line of light running along the ear, growing larger toward the front. The human eye follows lines, so it leads the gaze toward the face.


A lever-back does something a push back can't

A lever-back is a hinged arm: open it to thread through the piercing, then swing it back until you hear a click. Once closed, the arm hugs the back of the earlobe while the post holds the front, clamping the earring between them.

That's exactly what an elongated face needs. An ordinary push back holds at only one point, so the earring rotates freely around the post — and with a face that has a clear direction, a slight turn puts the band of stones off the line of the ear, looking askew at once. Clamped from both sides, its direction is fixed: however you put it on, it stays exactly like that all day.

One more point long-time wearers value highly: a closed lever-back doesn't open by itself. It doesn't rely on the friction of two metal arms — which weakens over the years — but on a mechanical catch.

An ordinary push back

Quick and neat, suited to a single round stud with no direction. But it holds at one point, so a directional face will rotate askew, and its grip weakens after a few hundred times on and off.

A lever-back — this pair

Clamped on both sides so the direction is fixed, closed by a catch so it won't pop open. In exchange, it's slower to use and takes a few tries to get used to.

This pair is heavier than it looks

The cluster, the tapering band and the whole fastening add up to a sizable mass of gold — much more than a pair of single-stone studs of the same width, since here the gold has to both support the band of stones and do the job of fastening. Pick it up and you'll feel it at once: it has the satisfying weight of a real piece.

That weight is the second reason a lever-back is right here. The arm rests on a wide area at the back of the earlobe, spreading the force rather than putting all the weight on one point around the piercing. You feel it most after four or five hours of continuous wear.


Three things to check when you hold them

1Open and close the fastening a few times — you should hear a crisp click each time it closes. If it closes silently or needs hard pressure to engage, the catch isn't right — say so right at the counter; it can be adjusted.
2Place the two side by side and compare the direction of the band — the two should be mirror images, meaning the tapering bands of the left and right run in opposite directions. Made in the same direction, one side would run against the line of the ear when worn.
3Turn them over and look at the fastening — buyers often skip this because it's hidden. The back should be polished like the front, with no file marks left; this is what touches the skin all day.

To be frank: the catch of a lever-back is a mechanical part, and mechanical parts wear. After a few years of regular wear, the click gets fainter — that's the time to bring them in for tightening, a small, quick job, but don't skip it once you notice. And since the face is elongated, it touches glasses frames and catches tangled hair more than a small, neat single-stone stud.

Buy at Thảo Linh

See them in person at our showroom, 120 Pham Thi Tanh, Chanh Hung Ward, Ho Chi Minh City, or call 0945 006 001 so our staff can hold them and have the grading report ready for you to check. Every piece at Thảo Linh comes with a 12-month warranty, free lifetime polishing and ultrasonic cleaning, and an open buy-back and exchange policy at fixed rates — you know the numbers from the moment you buy.

Shopping cart

Your cart is empty

Add a piece to continue shopping

Explore jewelry