3.6 mm Lab-Grown Diamond Bangle, 14K White Gold
Product code: VT-14368
Material
Quantity
A hinged 14K white gold bangle, the top half set with a row of large lab-grown diamonds in individual open-sided four-prong settings, the lower half left plain and polished.
Jewelry details
Nineteen round lab-grown diamonds are set in a row across the top half of this white gold bangle, each standing in its own four-prong setting. The lower half is plain and mirror-polished, so when worn, the part showing on top of the wrist is the row of stones, while the part resting on the table is gold.
This is a half-set bangle with fairly large stones — from a distance you can already see each individual stone, not just a band of tiny sparkles.
The row of stones on the top half
Each diamond sits in its own four-prong setting, the settings placed close together in a row. Unlike shared-prong setting, here each stone has its own frame, so each stands distinct, its face rising clearly and catching light from many sides.
Because the stones are large, the spacing between them is kept even so the row doesn't look dense in the middle or sparse at the ends. Both ends of the row finish neatly before reaching the plain section, so the transition from stone to gold looks clean, not ragged.
From the side: open settings
Tilt the bangle and you'll see that under each stone is a setting open on both sides, its prongs standing straight like small columns in a row. This open design lets light enter the base of the stone from the side, making the stones far brighter than a closed, recessed setting.
The open sides also make cleaning easier: soapy water and a soft brush reach under the stones to clear trapped dust — the thing that dulls diamonds fastest with daily wear.
Why only the top half is set
The lower half of the bangle is the part that rests on desks, keyboards or handbags. Leaving it plain protects the stones and prongs from knocks and scrapes, and lets the bangle sit comfortably when your hand is down, with no stone edges pressing into the tabletop or your wrist. The bangle opens by a hinge on one side and locks on the other, so you don't have to slide it over your hand.
Honest points to weigh first
Individual settings for large stones mean the row sits higher than a recessed setting, so it can catch on wool, scarves or bag straps if you're not careful.
Since only the top half is set, the bangle has a "front". When it rotates, the plain part shows; many people choose a slightly snug size so the row of stones rotates underneath less.
The hinge and clasp take the most stress on a rigid bangle. When putting it on and taking it off, open it gently with both hands.
How the workshop makes this bangle
With stones this size, the height of the nineteen settings must be perfectly even — viewed from the side, the faces of the stones must lie on one curve continuous with the body of the bangle. The jeweler aligns each setting to that curve before setting the stones, then selects stones from the same lot for even color and brilliance.
Each stone is held by four evenly pressed prongs, their tips filed round so they don't hook into fabric. The plain half is polished last until perfectly smooth, so the gold shines as brightly as the stones.
Before delivery, the jeweler checks every prong and the fit of the hinge and clasp again.
Metal and stones
The bangle is made of 14K white gold — harder than 18K, holding the prongs firmly and keeping the bangle's shape, well suited to everyday wear. 14K white gold naturally has a slight ivory tint, so it's rhodium-plated for a bright white color; the plating thins over time, especially on the lower half or where it rubs, and when you see it tinting, just bring it to the store for re-plating.
All nineteen stones on the bangle are round lab-grown diamonds of the same size. Lab-grown diamonds have the same structure, hardness and brilliance as mined diamonds, and the naked eye can't tell them apart; the difference lies in origin and price, so for the same budget you get larger, clearer stones.
Choosing a size and keeping it bright
On sizing, there's a point many people get wrong: a rigid bangle isn't measured like a chain bracelet. Wrap a soft tape measure around the spot on your wrist where you usually wear a bangle and give the store the measurement. With a bangle that has a front like this one, a slightly snug fit keeps the row of stones on top; trying a sample bangle at the store is the surest way.
Who it suits, and when to wear it
The bangle suits those who love diamonds in clear detail, who want to see each stone rather than just a band of sparkle. The row of large stones stands out enough to wear alone on important occasions, while the plain half keeps it neat for work.
If your wrist is small, the row of stones will cover nearly the whole top of the wrist and look very full; on a larger wrist, the bangle still looks balanced because each stone is big enough not to get lost. If you often wear a watch, wear the bangle on the other wrist so the stones don't knock against the watch face.
The bangle pairs beautifully with four-prong rings or earrings in the same white gold, and makes a fitting gift for anniversaries, birthdays or weddings.
See the bangle at Thảo Linh Jewelry
You can visit the Thảo Linh Jewelry showroom to try it on, see the row of stones under real light and have your wrist measured in person. The bangle is crafted in Thảo Linh's own workshop, so it's made to your wrist measurement; the completion time will be confirmed when you finalize the design.
